CTA Manufacturing E-Z Chamfer Tool - Large

Features and Benefits:

• Services wheel hub studs on many light; medium and heavy-duty applications. Over time; wheel hub studs will damage or burr due to road debris; etc. The damaged tip or threads of the wheel hub stud resemble that of burr from thermal cutting; milling; drilling; etc. This tool is used to simply deburr the tip and first few threads of a wheel hub stud to ensure a nut or lug-nut does not cross-thread when reinstalled.� 5 Point design for quick and clean deburring� Range: 0.7” ‐ 1.5” (18-38mm)� Single M2-HSS Construction - High Speed Steel is a tungsten-molybdenum high speed steel suitable for a wide variety of applications� Efficiently removes burrs and ridges from bolts; pipe; threaded rod; bar and dowels� Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die� It is suitable for use on metals including:o MILD STEEL - U.S. Grade 2 - Metric Grade 4.8o HARD STEEL - U.S. Grade 5 - Metric Grade 8.8o VERY HARD STEEL - U.S. Grade 8 - Metric Grade 10.9o STAINLESS STEEL - 300 Serieso SUPER HARD STEEL - U.S. Grade ASTM-A574 - Metric Grade 12.9� ATTENTION: For best results; use a slow drill speed with medium pressure on most materials (Harder materials will require a higher feed pressure)� On most applications it is only necessary to chamfer the first 1 to 3 threadso USE AT LOW SPEED - MAXIMUM 800RPM.o IMPACT DRIVERS WILL REDUCE TOOL LIFE� E-Z CHAMFER (M2-HSS) recommended RPM according to size:o 18-24mm (600RPM)o 23-29mm (400RPM)o 30-38mm (300RPM)



Services wheel hub studs on many light; medium and heavy-duty applications. Over time; wheel hub studs will damage or burr due to road debris; etc. The damaged tip or threads of the wheel hub stud resemble that of burr from thermal cutting; milling; drilling; etc. This tool is used to simply deburr the tip and first few threads of a wheel hub stud to ensure a nut or lug-nut does not cross-thread when reinstalled.� 5 Point design for quick and clean deburring� Range: 0.7” ‐ 1.5” (18-38mm)� Single M2-HSS Construction - High Speed Steel is a tungsten-molybdenum high speed steel suitable for a wide variety of applications� Efficiently removes burrs and ridges from bolts; pipe; threaded rod; bar and dowels� Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die� It is suitable for use on metals including:o MILD STEEL - U.S. Grade 2 - Metric Grade 4.8o HARD STEEL - U.S. Grade 5 - Metric Grade 8.8o VERY HARD STEEL - U.S. Grade 8 - Metric Grade 10.9o STAINLESS STEEL - 300 Serieso SUPER HARD STEEL - U.S. Grade ASTM-A574 - Metric Grade 12.9� ATTENTION: For best results; use a slow drill speed with medium pressure on most materials (Harder materials will require a higher feed pressure)� On most applications it is only necessary to chamfer the first 1 to 3 threadso USE AT LOW SPEED - MAXIMUM 800RPM.o IMPACT DRIVERS WILL REDUCE TOOL LIFE� E-Z CHAMFER (M2-HSS) recommended RPM according to size:o 18-24mm (600RPM)o 23-29mm (400RPM)o 30-38mm (300RPM)